Troubleshooting

Using the Oscilloscope

For debugging purposes, one can look at the signals with the scope, without using the DAQ. Needed equipment: - Oscilloscope: located in the cabinet on the mezzanine - Cables: 2 RG-58 cables terminated with a BNC on one side, and with a LEMO on the other side. Two of these cables are avalable next to the PM2 rack

ConnectionError

Many errors of type:

requests.exceptions.ConnectionError:

The tunnel to the AnalogDiscoveryPro digitizer is down. Re-establish the tunnel as described at the beginning of this wiki.

Flash Lamp

The flash lamp energy cannot be set to 5000 mJ.